15: Command Reference
SLC™ Console Manager User Guide
252
Should you make a mistake while typing, backspace by pressing the
Backspace
key and/or
the
Delete
key, depending on how you accessed the interface. Both keys work if you use
VT100 emulation in your terminal access program when connecting to the console port. Use
the
left
and
right
arrow keys to move within a command.
Use the
up
and
down
arrows
to scroll through previously entered commands. If desired,
select one and edit it. You can scroll through up to 100 previous commands entered in the
session.
To clear an IP address, type
0.0.0.0
, or to clear a non-IP address value, type
CLEAR
for
parameters which accept the
CLEAR
command. CLI parameters which accept
CLEAR
are
listed at the beginning of each section.
When the number of lines displayed by a command exceeds the size of the window (the
default is 25), the command output is halted until you are ready to continue. To display the
next line, press Enter, and to display the page, press the space bar. You can override the
number of lines (or disable the feature altogether) with
set cli
.
Deprecated Commands
Deprecated commands in this release are as follows:
set locallog (replaced by
)
show locallog (replaced by
)
Administrative Commands
admin banner login
Syntax
admin banner login <Banner Text>
Description
Configures the banner displayed after the user logs in.
Note:
To go to the next line, type \n and press Enter.
admin banner logout
Syntax
admin banner logout <Banner Text>
Description
Configures the banner displayed after the user logs out.
Note:
To go to the next line, type \n and press Enter.
admin banner show
Syntax
admin banner show
