Lantronix
Install Guide, SISPM1040-362-LRT and SISPM1040-384-LRT-C
33727 Rev. J
50
of
51
Class I Division 2
The product has been evaluated to the requirements of UL and the Canadian National Standard:
USL
– ANSI/ISA 12.12.01-2015, Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Divisions 1 and 2 Hazardous (Classified) Locations, Approved 21 August 2015.
CNL
– CAN/CSA C22.2 NO. 213-16, Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and
Class III, Divisions 1 and 2 Hazardous (Classified) Locations, Approved May 2016.
Note
: USL = United States Standards – Listed. CNL = Canadian National Standards – Listed.
These devices are open-type devices that are to be installed in an enclosure only accessible with the use of a
tool, suitable for the environment.
“This equipment is suitable for use in Class I, Division 2, Groups A, B, C, and D or non-hazardous locations only.”
WARNING
– EXPLOSION HAZARD. DO NOT DISCONNECT WHILE THE CIRCUIT IS LIVE OR UNLESS THE AREA IS
FREE OF IGNITIBLE CONCENTRATIONS.
Ces périphériques sont des périphériques ouverts qui doivent être installés dans un boîtier uniquement
accessibles avec l'utilisation d'un outil, adapté à l'environnement.
"Cet équipement est adapté à l'utilisation dans les classes I, Division 2, Groupes A, B, C et D ou des sites non
dangereux seulement".
AVERTISSEMENT
- RISQUE D'EXPLOSION. NE DÉCONNECEZ PAS QUE LE CIRCUIT EST VIVANT OU À MOINS QUE
LA ZONE EST LIBRE DE CONCENTRATIONS IGNITIVE.
