Lantronix
Install Guide, SISPM1040-362-LRT and SISPM1040-384-LRT-C
3
of
51
Revision History
Date
Rev. Comments
5/27/21 G
FW v7.20.0063: add API commands Set SSL Key and Get SSL Key Status. Add ping,
traceroute, and activate_config API commands. Add API commands for Auto Power Reset,
SNMP trap config, Show syslog, Clear syslog, and SFP port details. Fix Traceroute, SNMP
Write community, and set ACL via API issues. Modify API response structure for getting
firmware upgrade, active config, Ping, Traceroute, set SSL key, and login and logout status.
Fix Traceroute and SNMP Trap Destination Port value issues. Add API command
/api/get_config_action_status.
7/16/21 H
Replace IEC60950-1 with IEC62368-1/EN62368-1.
9/28/22 J
Add ConsoleFlow and LPM support, update address and labels, add PS-DC-DUAL-5624T.
Initial Lantronix rebrand. Add IEEE 802.3bt Power Input Ripple and Noise Specification.
Update contact info.
Safety Warnings and Cautions
These products are not intended for use in life support products where failure of a product could reasonably be
expected to result in death or personal injury. Anyone using this product in such an application without express
written consent of an officer of Lantronix does so at their own risk and agrees to fully indemnify Lantronix for any
damages that may result from such use or sale.
Attention
: This product, like all electronic products, uses semiconductors that can be damaged by ESD
(electrostatic discharge). Always observe appropriate precautions when handling.
Note
: Emphasizes important information or calls your attention to related features or instructions.
Caution
: Alerts you to a potential hazard that could cause loss of data or damage the system or
equipment.
Warning
: Alerts you to a potential hazard that could cause personal injury.
