Lantronix
Install Guide, SISPM1040-362-LRT and SISPM1040-384-LRT-C
33727 Rev. J
47
of
51
6
Regulatory and Safety Information
Compliance and Safety Statements
FCC-CLASS A: This equipment has been tested and found to comply with the limits for a Class A computing device pursuant
to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense. You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your authority to operate the equipment.
CE MARK DECLARATION OF CONFORMANCE FOR EMI AND SAFETY (EEC): This equipment has been tested and found to
comply with the protection requirements of European Emission Standard EN55022/EN61000-3 and the Generic European
Immunity Standard EN55024.
Declaration of Conformity
Manufacture’s Name: Lantronix, Inc.
Manufacture’s Address: 48 Discovery, Suite 250, Irvine, California 92618
Declares that the products: SISPM1040-362-LRT and SISPM1040-384-LRT-C
Conform to the following Product Regulations:
EN 55032: 2015:+AC: 2016 (Class A); CISPR 32: 2015+COR1: 2016 (Class A); EN 61000-3-2: 2014; EN 61000-3-3:
2013; AS/NZS CISPR 32: 2015, EN 61000-3-2: 2014; EN 61000-3-3: 2013.
EN 55024: 2010+A1: 2015; EN 55035: 2017; IEC 61000-4-2: 2008; IEC 61000-4-3: 2006+A1: 2007+A2: 2010;
IEC 61000-4-4: 2012; IEC 61000-4-5: 2014+A1: 2017; IEC 61000-4-6: 2013+COR1: 2015; IEC 61000-4-8: 2009; IEC
61000-4-11:2004+A1: 2017. 47 CFR FCC part 15 Subpart B (Class A); ANSI C63.4:2014; ICES-003 Issue 6 (Class A);
ANSI C.63.4: 2014. NEMA TS 2-2016 (2.2.7 Test Procedure: Transients, Temperature and Humidity) (2.2.8
Vibration Test) (2.2.9 Shock Test).
With the technical construction on file at the above address, this product carries the CE Mark.
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and
Standard(s).
Place: Irvine, California
Date: April 27, 2022
Signature:
Fathi Hakam
Full Name: Fathi Hakam
Position: Vice President of Engineering
