Lantronix
Install Guide, SISPM1040-362-LRT and SISPM1040-384-LRT-C
13
of
51
RESET Button
By pressing the
RESET
button for a specific amount of time, you can:
Reset the Switch
: to reboot and get the switch back to the previous
configuration settings saved.
Restore the Switch to Factory Defaults
: to restore the original factory default settings back to the switch.
Use the table below to determine which task is being performed by reading the LED behaviors while pressing
the
RESET
button. When the LED behaviors are correctly displayed, release the
RESET
button.
Table 7: RESET Button Description
Task to perform
Press RESET for
SYS LED Behavior
Port Status LED Behavior
Reset the Switch
2 ~ 7 seconds
Blinking Green
ALL LEDs are Off.
Restore to Defaults
7 ~ 12 seconds
Blinking Green
ALL LEDs stay lit.
After you release the
RESET
button, wait a few moments for LED activity to stop.
Front Panel Ground Screw
The front panel grounding screw (
) can be used for grounding.
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection from the
ground screws to the grounding surface prior to connecting devices.
Note
:
Both the switch and Power Supply 25104 / 25105 must have their ground terminals connected to earth
ground.
ATTENTION
:
This case must be earth grounded.
No DC input may be earth grounded.
Use Isolated Power Supply.
