Lantronix
Install Guide, SISPM1040-362-LRT and SISPM1040-384-LRT-C
33727 Rev. J
41
of
51
Cable Specifications
You may use unshielded twisted-pair (UTP) for RJ-45 connections:
□
Category 3 or better for 10 Mbps connections,
□
Category 5 or better for 100 Mbps connections, or
□
Category 5, 5e, or 6 for 1000 Mbps connections.
For fiber optic connections, you may use:
□
50/125 or 62.5/125 micron multimode fiber, or
□
9/125 micron single-mode fiber.
Power Supply Features and Specifications
These Industrial Power Supplies are optional accessories (sold separately).
□
25104 Input: 85-264 VAC, 124-370 VDC. Output: 48~55 VDC, 5.0A, 240 Watts.
□
25105 Input: 85-264 VAC, 124-370 VDC Output: 48~55 VDC, 2.5A, 120 Watts.
□
PS-DC-DUAL-5624T: Hardened 345 Watt Isolated PS with 56VDC and 24VDC Dual Output.
Caution
: Tying the output connection of the DC power supply to earth ground to create an earth referenced
voltage power supply will violate the power supply isolation to earth ground requirements of IEEE
802.3af/at/bt. If an earth grounded power supply is utilized, all connected equipment to this power source
must then be tied to same local earth ground as the power supply source. Failure to maintain a common earth
ground potential for all nodes on the power distribution network can cause equipment damage due to high
voltage ground differences between the connected equipment. It is recommended that the power supply
connections for PoE networks not be tied to earth ground.
