Lantronix
Install Guide, SISPM1040-362-LRT and SISPM1040-384-LRT-C
33727 Rev. J
48
of
51
Compliance
EMI: CE, FCC Part 15, EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000- 4-5, EN61000-4-6, EN61000-4-8,
EC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration), NEMA TS-2.
Safety: IEC 62368-1:2014 (Second Edition); and/or EN 62368-1:2014/A11:2017; and/or BS EN 62368-
1:2014+A11:2017. UL Class 1/Div 2
Compliant: EN50155, EN50121-4, DNV, IEC61850-3, IEEE1613.
High Risk Activities Disclaimer
Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT
designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments
requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air
Traffic Control, Life Support, or Weapons Systems ("High Risk Activities"). Lantronix and its supplier(s) specifically disclaim
any expressed or implied warranty of fitness for such High Risk Activities.
Cautions and Warnings
Definitions
Cautions
indicate that there is the possibility of poor equipment performance or potential damage to the
equipment.
Warnings
indicate that there is the possibility of injury to person.
Cautions and Warnings appear here and may appear throughout this manual where appropriate. Failure to read
and understand the information identified by this symbol could result in poor equipment performance, damage
to the equipment, or injury to persons.
Caution
While installing or servicing the power module, wear a grounding device and observe all electrostatic discharge
precautions. Failure to observe this caution could result in damage to, or failure of the power module.
Warnings
Warning
:
The equipment is to be used only in a RESTRICTED ACCESS LOCATION and installed only by trained
SERVICE PERSONNEL.
Warning
: Do not connect the power module to an external power source before installing it into the chassis.
Failure to observe this warning could result in an electrical shock, even death.
Warning
: The power module has a provision for grounding. Equipment grounding is vital to ensure safe
operation. The installer must ensure that the power module is properly grounded during and after installation.
Failure to observe this warning could result in an electric shock, even death.
Warning
: A readily accessible, suitable National Electrical Code (NEC) or local electrical code approved
disconnect device and branch-circuit protector must be part of the building's installed wiring to accommodate
permanently connected equipment. Failure to observe this warning could result in an electric shock, even death.
