Lantech IES-3208C, User Manual

Page: 112 / 141

105
6.17.1. G.8032 Ethernet Ring Protection Configuration
The G.8032 Ethernet Ring Protection Switch instances are configured here.

ID
The ID of the created Protection group

Enabled
Enable/Disable the G.8032 ERP.

Role
It can be either RPL owner or RPL Neighbor.

Type
Type of Protection ring. It can be either major ring or sub-ring.

Ring Port 0
This will create a Port 0 of the switch in the ring.

Ring Port 1
This will create "Ring Port 1" of the switch in the Ring.

Node Failure Protection
This option can prevent the event that all switch in the same ITU ring reboot together
then the ITU Ring will fail.

Node Failure Protection
This option will prevent loop problem caused by the end user connect wrong ring port.