Lantech IES-3208C, User Manual

Page: 109 / 141

102
are standby/redundant ports and can be aggregated if working ports fail.
6.16.2 LACP Port Status
You can check the setting of Port aggregation in Status.

Trunking Group
Number of trunking group

LACP
' Yes' means that LACP is enabled and the port link is up. 'No' means that LACP
is not enabled or that the port link is down. 'Backup' means that the port could not join
the aggregation group but will join if other port leaves. Meanwhile it's LACP status is
disabled.

System ID
The ID of each Trunking group

Port Members
Each switch port is listed for each group ID. Select a radio button to include a
port in an aggregation, or clear the radio button to remove the port from the
aggregation. By default, no ports belong to any aggregation group. Only full duplex
ports can join an aggregation and ports must be in the same speed in each group.