Lantech IES-3208C, User Manual

Page: 61 / 141

54
than 64 octets], oversize, CRC error, fragments and jabbers) via this port.

Tx Abort Packet: The aborted packet while transmitting.

Packet Collision: The counts of collision packet.

Packet Dropped: The counts of dropped packet.

Rx Bcast Packet: The counts of broadcast packet received.

Rx Mcast Packet: The counts of multicast packet received.

Tx Mcast Packet: The counts of multicast packet transmitted

Click
Clear
button to clean all counts.
6.6.4 Mirroring
The Port mirroring is a method for monitor traffic in switched networks. Traffic through
ports can be monitored by one specific port, which means traffic goes in or out
monitored (source) ports will be duplicated into mirror (destination) port.

Destination : You can set which switch port will be responsible for collecting the
data which was duplicated from the source port.

Mirrpr From: You can set which switch port will be duplicated then send to the
destination port.
Note1 : All the duplicated data of the source port can be separated with RX and
TX, if you want to collect multi-source ports at the same time, you can assign the
Tx of one destination port to be responsible for collecting all the Tx data of
source ports and assign another RX of destination port to be responsible for
collecting all the Rx data of source ports.

And then, click
Apply
button.