Lantech IES-3208C, User Manual

Page: 48 / 141

41
check boxes of power 1/power 2 ticked, the FAULT LED indicator will then be
possible to light up when any one of the power failures occurs. As for the Port Link
Down/Broken detection, the FAULT LED indicator will light up when the port failure
occurs; certainly the check box beside the port must be ticked first. Please refer to
the segment of
‘
Wiring the Fault Alarm Contact
’ for the failure detection.

Power Failure : Tick the check box to enable the function of lighting up the
FAULT LED on the panel when power fails.

Port Link Down/Broken : Tick the check box to enable the function of lighting
up FAULT LED on the panel when Ports
’ states are link down or broken.