Lantech IES-3208C, User Manual

Page: 123 / 141

116
Appendix
—Command Line mode
Except the web access mode, the Lantech switch also support Telnet access and console
access mode, to compare the web access mode, both the Telnet and console only support
command line user interface, all these commands are shown as below:
1. Access via console port
When the connection between Switch and PC is ready, turn on the PC and run a
terminal emulation program or Hyper Terminal and configure its communication
parameters to match the following default characteristics of the console port:
Baud Rate:115200 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
The settings of communication parameters
Having finished the parameter settings, click ‘
OK
’. When the blank screen shows up,
press Enter key to have the login prompt appears. First you need to key in
‘
admin
’
(default value) for both User name and Password (use Enter key to switch), then press