Lantech IES-3208C, User Manual

Page: 11 / 141

4
Support various ring/chain topologies
Ring covers data & multicast* packets
User friendly UI

Auto topology drawing

Topology demo

Auto configuration for G.8032*
Port Trunk with
LACP
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk
members
Load balancing through LACP to distribute load*
LLDP
Supports LLDP to allow switch to advise its identification
and capability on the LAN
CDP
Cisco Discovery Protocol for topology mapping
PoE
Management
(IPES series)
PoE Detection to check if PD is hang up then restart the
PD
PoE scheduling to On/Off upon routine time table
Per port PoE status include voltage
、
current and watts
VLAN Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to 4K,
VLAN ID can be assigned from 1 to 4096.)
GVRP (256 Groups)*,GMRP*, MVRP (Multi VLAN
Registration), QinQ*
Network Security Support 10 IP addresses that have permission to access
the switch management and to prevent unauthorized
intruder.
802.1X access control for port based and MAC based
authentication/MAC-IP-Port binding
Management access control with priority