Lantech IES-3208C, User Manual

Page: 79 / 141

72

Port Base Priority
Configure the priority level for each port. With the drop-down selection item
of Priority Type above being selected as Port-based, this control item will
then be available to set the queuing policy for each port.

Cos
Set up the COS priority level. With the drop-down selection item of Priority
Type above being selected as COS only/COS first, this control item will
then be available to set the queuing policy for each port.

Tos
ToS priority: the system provides 0~63 ToS priority level. Each level has 8
type of priority - 0~7. The default value is "1" priority for each level. When
the IP packet is received, the system will check the ToS level value in the IP
packet has received. For example: user set the ToS level 25 is 7. The port 1
is following the ToS priority policy only. When the packet received by port 1,
the system will check the ToS value of the received IP packet. If the ToS
value of received IP packet is 25(priority = 7), and then the packet priority
will have highest priority.
Click
Apply
to have the configuration take effect.