Lanier LD225, Settings Manual, Page: 95 / 184

Fax Destination
83
5
E
Select the name whose fax desti-
nation you want to register.
Press the name key, or enter the
re gistered number usin g the
number keys.
Note
❒
If you press , you can search
by the registered name, user
code, fax number, folder name,
e-mail address, or IP-Fax desti-
nation.
❒
To register the name, key dis-
play, and title, see p.74 “Regis-
tering Names”.
F
Press [ Fax Dest. ] .
G
Enter the fax number using the
number keys, and then press
[ OK ]
under Facsimile No..
To select the line
A
Press [ Select Line ] .
B
Select the line, and then press
[ OK ] .
To program the SUB Code
A
Press
[ Adv. Features ]
, and then
select [ SUB Code ] .
B
Press [ Change ] under TX SUB
Code.
C
Enter a SUB Code using the
number keys, and then press
[ OK ] .
D
To enter a password, press
[ Ch ang e ] unde r Pa ssword
(SID).
E
Enter a password using the
number keys, and then press
[ OK ] .
F
Press [ OK ] .
To program the SEP Code
A
Press [ Adv. Features ] , and then
select [ SEP Code ] .
B
Press [ Change ] under RX SEP
Code.
C
Enter a SEP Code using the
number keys, and then press
[ OK ] .
D
To enter a password, press
[ Ch ang e ] unde r Pa ssword
(PWD).
E
Enter a password using the
number keys, and then press
[ OK ] .
F
Press
[ OK ]
.
To set the International TX Mode
A
Press [ Change ] under Interna-
tional TX Mode.
B
Select
[ Off ]
or
[ On ]
, and then
press [ OK ] .
To select the fax header
Note
❒
You can register the fax header
in Program Fax Information in
the system settings for Facsimi-
le Features. See “Program-
ming”,
Facsimile Reference <Basic
Features> .
RuC4_EN_gsg-F_FM_forPaper.book Page 83 Tuesday, April 5, 2005 12:06 PM