Lanier LD225, Settings Manual, Page: 66 / 184

User Tools (System Settings)
54
4
Accessing User Tools (System Settings)
This section is for key operators in
charge of this machine.
User Tools allow you to change or set
defaults.
Note
❒
Operations for System Settings dif-
fer from normal operations. Al-
ways quit User Tools when you
have finished. See p.54 “Exiting
User Tools”.
❒
Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the
{
Energy
Saver
}
or
{
Clear Modes
}
key is
pressed.
Changing Default Settings
Note
❒
If the Administrator Authentica-
tion is specified, contact your ad-
ministrator.
A
Press the
{
User Tools/Counter
}
key.
B
Press [ System Settings ] .
C
Select the menu, and then press
the appropriate key.
Reference
p.51 “User Tools Menu (System
Settings)”
D
Change settings by following in-
structions on the display panel,
and then press
[ OK ] .
Note
❒
To cancel changes made to set-
tings and return to the initial
d i s p l a y , p r e s s t h e
{
U s e r
Tools/Counter
}
key.
Exiting User Tools
A
Press the
{
User Tools/Counter
}
key.
Note
❒
You can also exit User Tools by
pressing
[ Exit ] .
RuC4_EN_gsg-F_FM_forPaper.book Page 54 Tuesday, April 5, 2005 12:06 PM