manualshive.com logo in svg

Lanier LD225, Settings Manual, Page: 33 / 184

Share
Download
Lanier LD225 Settings Manual Download Page 33

Guide to Components

21

1

External Options

1.

500-sheet finisher

Sorts, stacks and staples copies.

Note

❒

You cannot install two finishers si-
multaneously.

2.

Bridge unit

Relays copies to the finisher.

3.

Exposure glass cover

Lower this cover over originals.

4.

ADF

Load a stack of originals. They will feed
in automatically.

5.

Internal tray 2 (1 bin tray)

If you select this as the output tray, copies
are delivered face down.

6.

1000-sheet finisher

Sorts, stacks and staples copies.

*1

: Finisher upper tray

*2

: Finisher shift tray

Note

❒

You cannot install two finishers si-
multaneously.

7.

Shift sort tray

Sorts and stacks copies.

8.

Paper tray unit

Consists of two paper trays.

9.

Large Capacity Tray (LCT)

Holds up to 2000 sheets of paper.

AHR038S

RuC4_EN_gsg-F_FM_forPaper.book  Page 21  Tuesday, April 5, 2005  12:06 PM

Summary of Contents for LD225

























































































































































































Reviews:

No comments