Lanier LD225 Settings Manual Download Page 159

Page: 159 / 184

Maintaining Your Machine

147

Maintaining Your Machine

If the exposure glass, exposure glass
cover, or ADF belt is dirty, copy clari-
ty may be reduced. Clean these parts
if they are dirty.

❖

Cleaning the machine

Wipe the machine with a soft,
damp cloth, and then wipe it with
a dry cloth to remove the water.

Important

❒

Do not use chemical cleaners or or-
ganic solvents, such as thinner or
benzene. If such substances get in-
side the machine or melt plastic
parts, a failure might occur.

❒

Do not clean parts other than those
explicitly specified in this manual.
Other parts should only be cleaned
by your service representative.

Cleaning the Exposure Glass

Clean 1 and 2.

Cleaning the Exposure Glass
Cover

Cleaning the Auto Document
Feeder

Clean 1 and 2.

GDSH050J

ZGJS826E

GDSH130J

RuC4_EN_gsg-F_FM_forPaper.book Page 147 Tuesday, April 5, 2005 12:06 PM

Summary of Contents for LD225

























































































































































































Search results

Summary of Contents for LD225

Reviews:

Lanier LD225, Settings Manual, Page: 159 / 184

Search results

Summary of Contents for LD225

Reviews: