Lanier LD225 Settings Manual Download Page 14 | Manualshive

Page: 14 / 184

Lanier LD225 Settings Manual Download Page 14

2

Note to users in Canada
Note:

This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.

IEEE 802.11b Interface Unit Type H:
This device complies with RSS-210 of Industry Canada.
The term “IC:” before the certification/registration number only signifies that
the Industry Canada technical specifications were met.
To prevent radio interference to the licensed service, this device is intended to
be operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to licens-
ing.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (EIRP)
is not more than that required for successful communication.
This device has been designed to operate with an antenna having a maximum
gain of [0.45] dBi. Antenna having a higher gain is strictly prohibited per regu-
lations of Industry Canada. The required antenna impedance is [50] ohms.

RuC4_EN_gsg-F_FM_forPaper.book Page 2 Tuesday, April 5, 2005 12:06 PM

«
...
12
13
14
15
16
...
»

Summary of Contents for LD225

























































































































































































Reviews:

No comments