manualshive.com logo in svg

Lanier LD225, Settings Manual, Page: 154 / 184

Share
Download
Lanier LD225 Settings Manual Download Page 154

Troubleshooting

142

6

Replacing the Stamp Cartridge

When the stamp begins to fade, re-
place the cartridge.

Note

❒

This stamp cartridge is used for
facsimile and scanner functions.

❒

Use the cartridge specified for this
machine.

❒

Do not attempt to put ink into the
cartridge. Doing so will result in
leakage.

❒

Be sure not to dirty your fingers
with ink from the cartridge.

A

Open the ADF unit.

B

Open the stamp cover.

C

Pull out the old stamp cartridge.

Tap the cartridge lock lever several
times. The cartridge will eject.
Then remove the cartridge, while
pushing the lock lever.

D

Insert the new stamp cartridge.

Insert the cartridge until the metal
parts are no longer visible.

E

Press the stamp cover back in un-
til it clicks.

F

Close the ADF unit.

ZEXH070J

ZGNH011J

RuC4_EN_gsg-F_FM_forPaper.book  Page 142  Tuesday, April 5, 2005  12:06 PM

Summary of Contents for LD225

























































































































































































Reviews:

No comments