Lanier LD225 Settings Manual Download Page 141

Page: 141 / 184

Clearing Misfeeds

129

Clearing Misfeeds

CAUTION:

Important

❒

When clearing misfeeds, do not turn off the operation switch. If you do, your
copy settings will be lost.

❒

To prevent misfeeds, do not leave any torn scraps of paper inside the ma-
chine.

❒

If paper misfeeds occur frequently, contact your service representative.

Note

❒

More than one misfed area may be indicated. When this happens, check all
the areas indicated. See the following charts: A, B, C, D, P, R, Y, Z

❒

Inside the finisher, or inside the front cover, there is a sticker explaining how
to remove misfed paper.

•

The fusing section of this machine might be very hot. Caution should be tak-
en when removing misfed paper.

RuC4_EN_gsg-F_FM_forPaper.book Page 129 Tuesday, April 5, 2005 12:06 PM

Summary of Contents for LD225

























































































































































































Search results

Summary of Contents for LD225

Reviews:

Lanier LD225, Settings Manual, Page: 141 / 184

Search results

Summary of Contents for LD225

Reviews: