Lanier LD225 Settings Manual Download Page 69

Page: 69 / 184

Settings You Can Change with User Tools

❖

Output: Copier (copier)

You can specify a tray to which documents are delivered.

Internal Tray 1

Internal Tray 2

Finisher Upper Tray

Finisher Shift Tray

Note

❒

Default:

Internal Tray 1

❖

Output: Document Server (Document Server)

You can specify a tray to which documents are delivered.

Note

❒

Default:

Internal Tray 1

❒

For details about output trays, see p.57 “Output: Copier (copier)”.

❖

Output: Facsimile (facsimile)

You can specify a tray to which documents are delivered.

Note

❒

Default:

Internal Tray 2

❒

For details about output trays, see p.57 “Output: Copier (copier)”.

❖

Output: Printer (printer)

You can specify a tray to which documents are delivered.

Note

❒

Default:

Internal Tray 1

❒

The output trays set on the printer driver have priority over the output tray
specified above.

❒

For details about output trays, see p.57 “Output: Copier (copier)”.

AHR009S

RuC4_EN_gsg-F_FM_forPaper.book Page 57 Tuesday, April 5, 2005 12:06 PM

Summary of Contents for LD225

























































































































































































Search results

Summary of Contents for LD225

Reviews:

Lanier LD225, Settings Manual, Page: 69 / 184

Search results

Summary of Contents for LD225

Reviews: