Lanier GX3000 User Manual Download Page 112

Page: 112 / 257

109

Troubleshooting

1. Close the cover.

Check that the duplex unit is correctly attached and the duplex unit cover is closed.

p.21 "Detaching and Reattaching the Multi Bypass Tray (Optional)"

Duplex Unit Not Detected

The duplex unit is not attached correctly. Follow the procedure below to attach the duplex unit correctly.

If the bypass tray is attached to the printer, detach it.

1. Lock the lever for attaching the duplex unit.

Even if you are not duplex printing, the duplex unit must be attached. Otherwise printing will not start.

p.21 "Detaching and Reattaching the Multi Bypass Tray (Optional)"

Summary of Contents for GX3000

































































































































































































































































Search results

Summary of Contents for GX3000

Reviews:

Related manuals for GX3000

Brands by name

Popular brands

Lanier GX3000, User Manual

Search results

Summary of Contents for GX3000

Reviews:

Related manuals for GX3000

Brands by name

Popular brands