- 77 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
[email protected]
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
Dismantling/Disposal
23
At the end of its service life, the FLS 106 scanner has to be dismantled and disposed of in an
environmentally friendly way.
Unless a return and disposal agreement has been concluded with Langer EMV-Technik GmbH, the
scanner has to be properly dismantled and recycled.
Please note that only electrical specialists may work on electronic components and only the
respective specialists may dismantle all other components.
Hazards during Dismantling/Disposal
23.1
There is a risk of injuries from sharp edges, points and corners if the system is
not properly dismantled and disposed of. The tools used for dismantling and
disposing of the system may also cause injuries.
We thus recommend
Langer EMV-Technik GmbH be contacted in case of queries,
that sharp-edged and/or pointed components be dismantled and disposed of carefully,
that dismantled components be temporarily stored in a safe and tidy manner.
Dismantling
23.2
Switch the scanner off and disconnect the mains cable before dismantling.
Observe all applicable local health, safety and environmental regulations when dismantling the
scanner.
Disposal
23.3
Dismantled components have to be recycled:
Plastic materials have to be recycled.
Metal parts have to be scrapped.
All other materials have to be sorted by their materials and disposed of accordingly.
Observe the local disposal regulations.
