- 69 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
[email protected]
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
Connect the SSMB plug of the SSMB-HR10 cable to the SSMB connector of the SH 01 probe
holder (Figure 90). Connect the HR-10 plug to the "rot. Axis" connector on the Z-axis tower.
Figure 103: Connecting the SSMB plug to the SH 01
Connecting the HR10 plug to the connector on the Z-axis
tower
Then insert the near-field probe into the probe sleeve of the probe holder and carefully tighten the
screw on the outside of the probe sleeve by hand (Figure 104). The probe sleeve can also be
removed from the holder as it is held magnetically so as to facilitate the assembly (section 10.8).
Thanks to the rear bore, the probe sleeve can be returned to the magnetic holder of the SH 01 and
fastened in the correct position.
Figure 104: Mounting the near-field probe on the probe holder
