- 17 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
[email protected]
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
Risks if Not Used for Its Intended Purpose
5.2
Incorrect use of the FLS 106 scanner may put the user at risk, damage the scanner and/or the
technical equipment connected to the scanner.
Examples of improper use that may put persons/equipment at risk:
-
Safety devices are bypassed or rendered ineffective.
-
The FLS 106 scanner is used in a defective state.
-
The FLS 106 scanner is used outside the specified range of technical parameters.
-
The field of application is changed by modifications to the design.
Claims due to the scanner's abnormal use are excluded!
Safety Instructions
5.3
Risks cannot be totally excluded even if the FLS 106 scanner is used for its intended purpose.
Observe the safety information and hazard warnings listed below to prevent damage to property
and personal injury. Also observe the operating and safety instructions for all other devices used in
the measurement set-up.
Carry out a visual check before performing a measurement with a product from
Langer EMV-Technik GmbH. Replace any damaged connecting cables, attachments and probes.
Please contact Langer EMV-Technik GmbH if damaged parts need to be replaced or repaired.
Wear tight-fitting clothes when using the scanner.
Hazard Due to Electrical Voltage
5.3.1
Your life is at risk if you touch damaged electrical cables.
Important: Always check any attachments, measuring devices, cables and probes before using the
scanner. Never use any damaged or defective devices.
Do not connect or disconnect any cables whilst the FLS 106 scanner is in operation.
Only staff from Langer EMV-Technik GmbH may open the scanner and work on the electrical
components and electrical lines.
Switch the device off immediately, disconnect the mains plug and contact Langer EMV-Technik
GmbH if you detect any damaged insulation on lines, cables or electric components!
