- 35 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
[email protected]
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
Delivery
11
The FLS 106 scanner is delivered in a customised transport box. The scanner itself weighs 75 kg.
The transport box's dimensions and weight may vary depending on the equipment and place of
destination. Therefore, the total weight cannot be provided here.
Due to its high weight, the transport box should always be transported with a pallet truck or fork-lift
truck.
Acceptance Inspection
11.1
The packaging must be inspected for any damage incurred during transport on receipt of the
goods. Any visible transport damage should be noted in the forwarder's shipping documents.
Please contact the supplier immediately if there are problems in this respect.
Defects can only be claimed within the complaints period.
Storage
11.2
Observe the following points when storing the transport box including the scanner, devices and
accessories:
-
Store the box in a dry place.
-
Only store the box in closed rooms.
-
Store the box on a safe, level surface.
-
Store the box on the correct side (do not tilt).
-
Do not stack the box on another box and do not stack anything on top of the transport box.
Incorrect storage may damage the FLS 106 scanner, devices and/or accessories.
Opening the Transport Box
11.3
Ensure that the transport box is placed on level ground. Use appropriate tools to open the transport
box and prevent damage to the equipment. Do not break open the box by brute force.
When unpacking the box, carry out a thorough check that the consignment is complete on the
basis of the scope of delivery and that it has not been damaged during transport.
Defects can only be claimed within the complaints period.
Packaging
11.4
The packaging should prevent any damage during transport, corrosion and other damage.
Therefore, it should only be removed shortly before the set-up. Dispose of the packaging material
in compliance with the disposal regulations applicable at the place of installation.
Note: We recommend that the packaging material for the attachments be put aside to ensure that
the FLS 106 attachments and accessories can be stored safely.