Landice L10, Service Manual

Page: 8 / 66

8
Electrical Requirements
Landice requires that a dedicated circuit be wired for each piece of Landice equipment. For
optimal performance, DO NOT plug equipment into an AFCI or GFI circuit breaker/outlet.
Adapters or extension cords should not be used.
Treadmills marked 120 VAC are intended for use with a grounding plug in a nominal 120-volt
circuit. Ensure the treadmill power cord is connected to an outlet having the same configuration as
the plug.
Treadmills marked 200-250 VAC are intended for use on a circuit having a nominal rating greater
than 120V and are factory-equipped with a specific power cord and plug to permit connection to a
proper electrical circuit. Ensure the treadmill power cord is connected to an outlet having the
same configuration as the plug. No adapter should be used with 200 – 250 VAC treadmills.
If the treadmill must be configured for use on a different type of electrical circuit, qualified service
personnel should make the proper
For 220v & 110v units using 3-phase voltage:
• Each treadmill must have its own circuit breaker and be run on the same phase; same power
leg.
• If 220v power is required, all treadmills must run on the same two phases (power legs) and on
their own circuit breakers.
L10 Requirements L10 Treadmills are rated for 110 (120) VAC, 60 Hz, 20 AMP (uses a 20 amp
plug, receptacle and breaker) or 220 VAC, 60 Hz, 10 AMP (uses a 15 amp plug, receptacle and
breaker).
L10 Club 110v Electrical Requirements
Plug NEMA Style 5-20P
Receptacle NEMA Style 5-20R
L10 Club 220v Electrical Requirements
Plug NEMA Style 6-15P
Receptacle NEMA Style 6-15R