![background image](http://html1.mh-extra.com/html/landice/l10/l10_service-manual_673654035.webp)
35
Rear Roller Removal & Installation:
INTRODUCTION: This document is for the installation and removal of the Rear (Take-Up)
Roller (#10029).
TOOLS REQUIRED:
4mm Allen Wrench
5mm Allen Wrench
BEFORE YOU BEGIN
:
You will need to remove the bed end caps before you can
remove the rear roller.
Step 1
Using your
4mm
Allen Wrench, loosen and remove the two bolts holding the bed end caps in
place. Once the bolts are removed on both sides, proceed to remove both bed end caps.
Step 2
Now that the end caps are removed, use your
5mm
Allen Wrench to loosen remove the two
bolts holding the rear roller in place.
Summary of Contents for L10
