![background image](http://html1.mh-extra.com/html/landice/l10/l10_service-manual_673654022.webp)
22
Display Options – Endurance Console:
TURN OFF BEEP SOUND:
1)
The beeper is set to ON by default. When a button is pressed on the display or the mini-pod a beep will sound.
2)
To turn off the beeper: Press the Start button, and when the mill starts to boot up,
press Incline “Down” (-) button and START button on the display to turn off the beeper. Reverse to turn back
on the beeper.
CHANGE FROM ENGLISH TO METRIC MEASUREMENTS:
1)
Press Start to turn on treadmill.
2)
Press and hold Incline down (-), Speed down (-) and Start at the same time and hold down till display shows
ENG or MET.
3)
To change from one to the other press the STOP key. Press ENTER to save changes. Next it will display
voltage choice (110v or 220v). To change press STOP, to save press ENTER.
ACCESS TOTAL MILES & HOURS:
To enter engineering mode:
1) Start machine and then pull the safety key out
2) Press Speed Keys + (plus) and – (minus) simultaneously and count 3 seconds.
3) Push the safety key back and then release the + and – keys.
PO1 should appear on the screen. To change between screens, press the ENTER key.
To exit Engineering mode, press STOP key and restart the treadmill.
To access hours go to PA08.
To access miles go to PA09.
Summary of Contents for L10
