![background image](http://html1.mh-extra.com/html/landice/l10/l10_service-manual_673654031.webp)
31
Side Frame Cover (Traction Strip) Removal & Installation:
INTRODUCTION:
This document is to be used for installation and removal of the Side Frame
Covers (Traction Strips - #10046)
TOOLS REQUIRED:
4mm Allen Wrench
1/2” Wrench
BEFORE YOU BEGIN:
You will need to remove the motor cover, upright base cover, and the bed
end caps before you can remove the side frame covers.
Step 1
Using your
4mm
Allen Wrench, loosen and remove the two bolts holding the bed end caps in place.
Once the bolts are removed, proceed to remove both bed end caps.
Step 3
Step 4
Using your
4mm
Allen Wrench, loosen and
remove the bolt from the top of the side frame
cover.
Using your
½” Wrench
,
loosen and remove all
three side frame bolts located underneath the side
frame of the treadmill.
Summary of Contents for L10
