![background image](http://html1.mh-extra.com/html/landice/l10/l10_service-manual_673654030.webp)
30
Motor Cover Removal & Installation:
INTRODUCTION: This document is for installation and removal of the motor cover (#10045).
TOOLS REQUIRED:
4mm Allen Wrench
Using a
4mm
Allen Wrench, loosen and remove three Allen head bolts, one in the motor cover, and two
holding the upright base cover in place, as shown in Illustration A and B. Once you remove the bolts,
proceed to remove the covers on each side.
Using your
4mm
Allen Wrench, remove the 2 Allen head bolts, as shown in
Illustration C
. Repeat the
same process on the other side. Once done, you can now remove the motor cover as shown in
Illustration D
.
A
B
C
D
Summary of Contents for L10
