![background image](http://html1.mh-extra.com/html/landice/l10/l10_service-manual_673654010.webp)
10
Measuring AC & DC Amperage:
AC
Amperage must be performed on the
BROWN WIRE
of the line cord.
DC
Amperage must be performed on the
BLACK WIRE
from the drive motor.
Start by clamping your meter to the wire. While straddling the belt, start the treadmill and bring the speed
up to
3.0
mph at
0%
elevation. Once the treadmill is up to speed start walking on the treadmill while looking
at the voltmeter. The voltmeter will start giving you an amperage reading. The average highest reading
possible equals your amperage reading. The more friction between treadbelt and deck, as well as the heavier
the load on the belt, the hotter the treadbelt will become, which will increase your amperage reading.
A C A m perage
D C A m perage
Treadbelt C ondition
Rev 04-2021
2.0-4.0 A C A m ps
4.5-6.0 D C A m ps
G ood
4.1-5.9 A C A m ps
7.0-9.0 D C A m ps
N orm al
6.0-10.0 A C A m ps
9.0-12.0 D C A m ps
Replace
Adc Indicates DC Amperage
Aac Indicates AC Amperage
AMP METER CLAMP
USE THE CHART BELOW TO DETERMINE THE TREADBELT CONDITION
PERFORMING AMPERAGE INSTRUCTIONS
Summary of Contents for L10
