Land 4500 MKII Premier, Operation And Maintenance Manual

Page: 105 / 139

Model 4500 Premier Dust and Opacity Monitor
105
Setup Output Screens (Outputs)
Two signal outputs are available to the user and are setup using the ‘Output 1’ and ‘Output 2’ sub-
menus respectively. The time period used for block averaging may be set independently for each
output using the ‘Average 1’ and ‘Average 2’ sub-menus.
Illustrated below is the operational structure for the ‘Output 1’ and ‘Averaging 1’ sub-menus. The
operational structure for ‘Output 2’ and ‘Averaging 2’ are identical. Both ‘Output 1’ and ‘Averaging 1’
sub-menus are explained in more detail within this section.
↵ ↵↵ ↵↵
↵ ↵↵
↵↵
↵ ↵↵
↵↵
↵ ↵↵ ↵↵
↵ ↵↵ ↵↵
→
←
↵ ↵↵
↵↵
↵ ↵↵
↵↵
↵ ↵↵
↵↵
↵ ↵↵
↵↵
↵ ↵↵
↵↵
SETUP
Outputs
↑↓
Alarms*
↑↓
Miscellaneous*
↑↓
Service*
Output 1
↑↓
Averaging 1
↑↓
Output 2*
↑↓
Averaging 2*
Averaging: Off
xh xm xs
Averaging: Off
xh xm xs
Averaging: On
xh xm xs
↵ ↵↵
↵↵
Averaging: On
xh xm xs
↵ ↵↵ ↵↵
Averaging: On
xh xm xs
Dust
↑↓
Range: x.x
↑↓
During Cal.:Track
Cal. Drift
↑↓
Range: x.x
↑↓
During Cal.:Track
Optical Density
↑↓
Range: x.x
↑↓
During Cal.:Track
Constant Current
↑↓
Const. Current:x.x
↑↓
During Cal.:Track
Opacity
↑↓
Dust
↑↓
Constant Current
↑↓
Cal. Drift
↑↓
Optical Density
Opacity
↑↓
Range: x.x
↑↓
During Cal.:Track