![background image](http://html1.mh-extra.com/html/land-pride/pfs4000/pfs4000_operators-manual_3508961051.webp)
Section 9: Maintenance & Lubrication
PFS4000, PFS5060 & PFS8010 Pendulum Spreaders 309-124M
11/20/20
47
Lubrication
Spout Pivot
3 - Zerks (Clean zerks before injecting lubrication)
Type of Lubrication: Multi-purpose Grease
Quantity: 1 to 2 pumps
50
Hrs
Multi-purpose
spray lube
Multi-purpose
grease lube
Multi-purpose
oil lube
Intervals in hours at which
lubrication is required
Lubrication
Legend
8
Hours
Figure 9-1
Figure 9-2
Figure 9-3
30785
Check spout
attachment bolts &
nuts before each
filling of the hopper.
30787
30786a
Drive Unit Input Shaft
1 - Zerk (Clean zerk before injecting lubrication)
Refer to Figure 8-1 on page 38: Remove angle
adjustment cover (#1) and rotate flywheel (#3) until input
shaft zerk is expose below.
Type of Lubrication: Multi-purpose Grease
Quantity: 1-2 pumps
8
Hours
Spout Angle
1 - Zerk (Clean zerk before injecting lubrication)
Refer to Figure 8-1 on page 38: Remove angle
adjustment cover (#1) and rotate flywheel (#3) until wing
nut cover (#2) is in alignment with opening. Unscrew wing
nut cover (#2) to expose zerk.
Type of Lubrication: Multi-purpose Grease
Quantity: 1-2 pumps
8
Hours