Section 3: PFS5060 Assembly & Set-Up
PFS4000, PFS5060 & PFS8010 Pendulum Spreaders 309-124M
11/20/20
19
Hopper Support Frame Assembly
Refer to Figure 3-2:
1. Position support rods (#1) with bend ends up and
attach to the main frame with M10 x 30 (1 3/16")
carriage bolts (#2) and hex nuts (#3). Draw hex nuts
up snug, do not tighten at this time.
2. Attach hopper support ring (#4) to support rods with
M10 x 30 (1 3/16") carriage bolts (#5) and nuts (#3).
Draw nuts up snug, do not tighten at this time.
3. Attach hopper support ring (#4) to the front of the
main frame with M10 x 30 (1 3/16") carriage
bolts (#6) and hex nuts (#7). Tighten hex nuts (#7) to
the correct torque.
Hopper Support Frame Assembly
Figure 3-2
30766
4. Push down on the hopper ring at the support rod and
tighten hex nuts (#3) at the top and bottom of that
support rod.
5. Repeat step 4 at each support rod while tightening
the remaining hex nuts (#3).