Lancia Ypsilon Owner'S Handbook Manual Download Page 121

Page: 121 / 222

120

WARNING

LIGHTS AND

MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

DASHBOARD

AND CONTROLS

SAFETY

DEVICES

CORRECT

USE OF

THE CAR

The ABS system with
which the car may be fit-

ted does not control the trailer
braking system. Great care should
therefore be taken when driving on

slippery road surfaces.

WARNING

Under no circumstances
should the vehicle brake

system be altered to control the
trailer brake. The trailer braking
system must be fully independent
of the vehicle’s hydraulic system.

The towing device must meet cur-

rent regulations with reference to

94/20/EC Directive and subsequent

amendments.

For any version the towing device

used must match the towable weight

of the vehicle on which it is to be in-

stalled.

IMPORTANT Supplementary elec-

tric loads other than external lights

(e.g. electric brake, electric winch,

etc.) shall be used with running en-

gine.

WARNING

TOWING TRAILERS

IMPORTANT NOTES

For towing caravans or trailers the car

must be fitted with a certified tow

hook and an adequate electric system.

Installation should be carried out by

specialised personnel who release a

special document for circulation on

the road.

Install any specific and/or additional

rear-view mirrors as specified by law.

Remember that when towing a trailer,

steep hills are harder to climb, the

braking spaces increase and overtak-

ing takes longer depending on the

overall weight.

Engage a low gear when driving

downhill, rather than constantly us-

ing the brake.

The weight the trailer exerts on the

car tow hook reduces by the same

amount the actual vehicle loading ca-

pacity. To make sure the maximum

towable weight is not exceeded (given

in the log book) account should be

taken of the fully laden trailer, in-

cluding accessories and personal be-

longings.

Do not exceed the speed limits of the

country you are driving in. In any

case do not exceed 100 km/h.

INSTALLING THE TOW HOOK

The towing device should be fastened

to the body by specialised personnel

according to any additional and/or in-

tegrative information supplied by the

Manufacturer of the device.

111-124 Ypsilon GB 10-10-2008 10:26 Pagina 120

Summary of Contents for Ypsilon































































































































































































































Search results

Summary of Contents for Ypsilon

Reviews:

Related manuals for Ypsilon

Brands by name

Popular brands

Lancia Ypsilon, Owner'S Handbook Manual

Search results

Summary of Contents for Ypsilon

Reviews:

Related manuals for Ypsilon

Brands by name

Popular brands