Lancia Ypsilon, Owner'S Handbook Manual

Page: 151 / 222

150
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
IF AN EXTERIOR
LIGHT BURNS OUT
For the type of bulb and power rat-
ing, see “When needing to change a
bulb”.
FRONT LIGHT UNITS
The front light units contain the
side/taillights, dipped beam, main
beam and direction indicator bulbs.
To change the bulbs of the side/tail-
lights, dipped beams, main beams
and direction indicators it is necessary
to remove the cover A-fig. 17 releas-
ing the catch B-fig. 17 .
The bulbs are arranged inside the
light unit fig. 18 as follows:
C Direction indicators
D Main beam headlights
E Sidelights
F Dipped beam headlights
Once replacement is over, refit the
cover pressing it in the middle until
hearing the locking click. Then, check
for proper locking into place.
IMPORTANT To open the left-hand
bulb holder cover (running direction)
to replace the bulb, remove first of all
the engine compartment fuse box
cover B-fig. 19 .
fig. 17 L0C0135m fig. 18 L0C0136m
fig. 19 L0C0125m
135-164 Ypsilon GB 13-10-2008 11:42 Pagina 150