Lancia Ypsilon, Owner'S Handbook Manual

Page: 29 / 222

28
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Unit - “consumption”
(Consump.)
With this function it is possible to set
the units for fuel consumption (km/l,
l/100 km or mpg) according to the
distance unit set previously (km or
mi, see previous paragraph “Unit -
distance”).
If the distance unit set is km, fuel con-
sumption will be displayed in km/l or
l/100 km.
If the distance unit set is “mi”, fuel
consumption will be displayed in
“mpg”.
To set the required unit proceed as
follows:
– briefly press button MODE : km/l or
l/100km will flash on the display (ac-
cording to previous setting);
– press button
ö
or
õ
for setting;
– briefly press button MODE to go
back to the menu screen or press the
button for long to go back to the stan-
dard screen without storing settings.
Unit - “temperature”
(Temp. unit)
With this function it is possible to set
the temperature unit (°C or °F).
To set the required unit proceed as
follows:
– briefly press button MODE : °C or
°F will flash on the display (accord-
ing to previous setting);
– press button
ö
or
õ
for setting;
– briefly press button MODE to go
back to the menu screen or press the
button for long to go back to the stan-
dard screen without storing settings.
Selecting the language
(Language)
Display messages can be shown in the
following different languages: Italian,
German, English, Spanish, French,
and Portuguese.
To set the required language proceed
as follows:
– briefly press button MODE : the pre-
viously set “language” will flash on
the display;
– press button
ö
or
õ
for setting;
– briefly press button MODE to go
back to the menu screen or press the
button for long to go back to the stan-
dard screen without storing settings.
Adjusting the failure/warning
buzzer volume (Buzzer vol.)
With this function the volume of the
buzzer accompanying any failure/
warning indication can be adjusted
according to 8 levels.
To adjust the volume proceed as fol-
lows:
– briefly press button
MODE : the pre-
viously set volume “level” will flash
on the display;
– press button
ö
or
õ
for setting;
– briefly press button MODE to go
back to the menu screen or press the
button for long to go back to the stan-
dard screen without storing settings.
001-034 Ypsilon GB 10-10-2008 10:17 Pagina 28