Lancia Ypsilon Owner'S Handbook Manual Download Page 179

Page: 179 / 222

178

WARNING

LIGHTS AND

MESSAGES

TECHNICAL

SPECIFICATIONS

INDEX

DASHBOARD

AND CONTROLS

SAFETY

DEVICES

CORRECT

USE OF

THE CAR

IN AN

EMERGENCY

CAR

MAINTENANCE

BATTERY

Car battery is “low-maintenance”

type: under normal operating condi-

tions, it requires no topping of elec-

trolyte by distilled water.

CHECK ON CHARGING STATE
AND ELECTROLYTE LEVEL

Check operations are to be performed

in times and modes described in this

Car Maintenance, by authorized per-

sonnel only.

Any topping operation must be per-

formed by specialized personnel only

with the support of Lancia Dealer-

ship.

Liquid contained in the
battery is poisonous and

corrosive. Prevent any contact with
skin or eyes. Keep free flames or
spark sources away from the bat-

tery: danger of explosion or fire.

WARNING

Operation with excessively
low liquid can irreparably

damage the battery and provoke its
explosion.

WARNING

BATTERY REPLACEMENT

If necessary, replace the battery with

an original one with the same charac-

teristics.

If replaced with a battery having dif-

ferent characteristics, maintenance

expiry dates specified in “Scheduled

Service” do not apply any more.

Thus, for battery maintenance, com-

ply with instructions given by battery

Manufacturer.

165-186 Ypsilon GB 10-10-2008 11:22 Pagina 178

Summary of Contents for Ypsilon































































































































































































































Search results

Summary of Contents for Ypsilon

Reviews:

Related manuals for Ypsilon

Brands by name

Popular brands

Lancia Ypsilon, Owner'S Handbook Manual

Search results

Summary of Contents for Ypsilon

Reviews:

Related manuals for Ypsilon

Brands by name

Popular brands