Lancia Ypsilon, Owner'S Handbook Manual

Page: 61 / 222

60
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Each time the stalk is operated, the
3
warning light turns on together
with the message on the display (see
“Warning lights and messages” sec-
tion) showing the time for which the
function will stay on. The warning
light will come on the first time the
stalk is operated and it will stay on
until the function is turned off auto-
matically. Each operation of the stalk
will only extend the staying on of the
lights.
Deactivation
Keep the stalk pulled towards the
steering wheel for more than 2 sec-
onds.
AUTOMATIC HEADLIGHTS
SENSOR (daylight sensor)
(where provided) fig. 52
It detects the changes of the external
light intensity of the car according to
the light sensitivity set: greater is the
sensitivity, smaller is the amount of
external light necessary to control the
switching-on of the exterior head-
lights. The daylight sensor sensitivity
can be adjusted with the “Set-up
menu” of the display.
Activation
Turn the knurled ring to
2
A
: in this
way, the automatic activation of the
side/taillights and dipped beam head-
lights are simultaneously enabled ac-
cording to the external luminosity.
During the sensor operation lights can
only be made flashing.
When the daylight sensor is on, the
display shows the preset sensitivity
level. During displaying, the sensitiv-
ity level can be adjusted using buttons
ö
and
õ
fig. 53 .
Deactivation
As a result of the sensor control, the
main beam headlights will switch off
and, after about 10 seconds, sidelights
will switch off too.
The light sensor is not able to detect
the fog presence, lights shall therefore
be switched on manually.
fig. 52 L0C0185m fig. 53 L0C0225m
035-076 Ypsilon GB 10-10-2008 10:18 Pagina 60