Lancia Ypsilon Owner'S Handbook Manual Download Page 135

Page: 135 / 222

134

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

DASHBOARD

AND CONTROLS

SAFETY

DEVICES

CORRECT

USE OF

THE CAR

WARNING

LIGHTS AND

MESSAGES

LEFT-HAND DIRECTION

INDICATOR (green -

intermittent)

The warning light turns on

when the direction indicator control

lever is moved downwards or, to-

gether with the right indicator, when

the hazard warning light button is

pressed.

RIGHT-HAND

DIRECTION INDICATOR

(green - intermittent)

The warning light turns on

when the direction indicator control

lever is moved upwards or, together

with the left indicator, when the ha-

zard warning light button is pressed.

“DUALDRIVE”

ELECTRIC POWER

STEERING ACTIVATION

(symbol on display)

The indication CITY on the display

will turn on when engaging the

“Dualdrive” electric power steering by

pressing the relevant button. The in-

dication CITY will turn off when pres-

sing the button again.

CITY

CRUISE CONTROL

(where provided)

(green)

Turning the ignition key to

MAR

the warning light will turn on

but it should go off after a few se-

conds.

The warning light turns on when tur-

ning the knurled ring of the Cruise

Control to

The display will show the dedicated

message.

MAIN BEAMS (blue)

The warning light turns on

when the main beams are

turned on.

SPEED LIMIT EXCEEDED

The display will show the dedicated

message when the car exceeds the set

speed limit (see “Multifunction Di-

splay” in section “Dashboard and

controls”).

POSSIBLE PRESENCE OF ICE
ON THE ROAD

When the outside temperature reaches

or falls below 3°C to warn the driver

of the possible presence of ice on the

road, the display will show symbol

❄

a warning message and the tempera-

ture indication will start flashing.

LIMITED RANGE

The display will show the dedicated

message to warn the driver that the

cruising range is less than 50 km (or

30 mi) or the fuel level in the tank is

below 4 litres.

ASR SYSTEM

The ASR system can be turned off by

pressing the button

ASR OFF

The display will show the dedicated

message to warn the driver that the

system is off; at the same time the

button led will turn on.

Pressing again button

ASR OFF

the

button led will turn off and the di-

splay will show the dedicated message

to warn the driver that the system is

on again.

125-134 Ypsilon GB 10-10-2008 14:46 Pagina 134

Summary of Contents for Ypsilon































































































































































































































Search results

Summary of Contents for Ypsilon

Reviews:

Related manuals for Ypsilon

Brands by name

Popular brands

Lancia Ypsilon, Owner'S Handbook Manual

Search results

Summary of Contents for Ypsilon

Reviews:

Related manuals for Ypsilon

Brands by name

Popular brands