4.3 DAILY - CLEANING
A. Turn the key to
(FLUSH)
position.
B. Flush each valve until only clear water is dispensed.
C. Remove and wash drip tray and cup rest in cleaning solution. rinse thoroughly with warm water
and reinstall drip tray and cup rest to dispenser.
D. Wipe down any areas where concentrate may have spilled or beverages splashed.
E. If doors were opened to wipe soiled areas, close the doors.
F. Ensure the drain tube into the drip tray is properly seated.
G. Follow the product Loading procedures in the
(ON)
Mode.
4.4 EVERY TWO WEEKS - CLEANING AND SANITIZING
A. Turn key to
(FLUSH)
position. Flush each valve of dispenser until clear water flows from the
nozzle.
B. Open door and lift up the check valve (yellow elbow) to remove it from the Minute Pak ®
container.
C. Remove Minute Pak ® container from dispenser and refrigerate.
D. Remove Nozzles.
E. Wash thoroughly with cleaning solution.
!
CAUTION
DO NOT SOAK NOZZLES IN CHLORINE SOLUTION OVERNIGHT. THIS WILL CAUSE THE NOZZLES TO
SWELL AND THE PLASTIC TO DETERIORATE.
PRECAUCIÓN
NO SE MOJE BOQUILLAS EN SOLUCIÓN DE CLORO DE NOCHE. ESTO QUE LOS INYECTORES
SE OLEAJE Y EL PLÁSTICO SE DETERIORAN.
ATTENTION
DÉFENSE DE TREMPER LES NOZZLES DANS UNE SOLUTION DE CHLORE. CE PRODUIT
ENDOMMAGERA LE PLASTIC ET FERA GONFLER LES NOZZLES.
F. Rinse thoroughly with warm water and replace.
G. Using a funnel, fill the specially-marked sanitizing container to the top with cool sanitizing
solution. place sanitizing container in dispenser.
H. Place check valve in sanitizing container.
I. Press button for two minutes ensuring concentrate lines are full of solution. Let solution stand
for five minutes without dispensing.
J. For each valve, perform a second two-minute dispense and let stand for an additional five
minutes.
K. Press button until the sanitizing solution empties from the sanitizing container.
*
*
20
