46
Advanced programming
Entering the advanced menu
A
Press
and
simultaneously for 5 seconds to access the advanced menu.
B
Enter the password.
→ See "Access password", page 46.
Activation mode relay
Information
The number lit up on the upper part of the display identifies the relay to set.
Select the relay.
A
Set relay 1 or 2 using
or
.
B
Press
to go through the parameters shown in the
table below.
C
For each parameter, use
or
to change the value
and
to confirm.
RELAY PARAMETRISATION TABLE
Parameter
Description
Characteristics
C1
1st regeneration cycle.
OFF to duration of 1st cycle.
C2
2nd regeneration cycle.
OFF to duration of 2nd cycle.
C3
3rd regeneration cycle.
OFF to duration of 3rd cycle.
C4
4th regeneration cycle.
OFF to duration of 4th cycle.
Ri
Active during whole regeneration.
ON - OFF.
EC
Active from the end of regeneration until
the programmed time (minutes).
0 to 99 min.
SA
Salt alarm.
OFF - ON.
Fr
Active if the alarm FR01 is present.
OFF - ON.
AL
Active in case of salt alarm, alarm FR01
and alarm AL04. (high conductivity
alarm at the end of regeneration
OFF - ON.
B
Active during refill.
OFF or rF (during refill) or rFd (during
refill and brine draw).