36
Intermediate menu programming details
Regeneration mode
SH0: Time clock regeneration on predefined days; SH1: Delayed volumetric regeneration;
SH2: Immediate volumetric regeneration;
SH3: Regenerations are started based upon a programmed time interval (every 2, 3, 4, 6, 8 or
12 hours). The first regeneration starts at the regeneration time set in the basic menu and the
following regeneration will be carried out depending on the programmed interval;
Installation manual and programming
SH4: Time clock regeneration.
Set the regeneration mode.
A
Use
and
to change the selection.
B
Press
to confirm and switch to the next parameter.
Display units type
Information
The display shows the unit use for the remaining volume.
Information
The volume unit can be set in litres (L), cubic meters (CM) or in gallons (GAL).
Information
This parameter can only be modified in the advance programming menu.
Unit used for the remaining volume:
A
Press
to go to the next parameter.
Interval between regenerations
Information
This option is displayed only if
SH
(regeneration mode) is set to 3.
Set the interval between regenerations: 2, 3, 4, 6, 8 or 12 hours:
A
Use
and
to set the interval.
B
Press
to go to the next parameter.
