Lagrange GLACES CREATIV, Manual

Page: 56 / 64

STARTING AND USE
BEFORE USING THE UNIT
*
Before the first use, leave your unit on a flat surface for
12
hours
without plugging it in.
*
Be sure that you always keep the unit in a horizontal position
when you move it to avoid the risk of damaging the compressor.
Otherwise, wait
12
hours before using your unit again.
1
ST
USE
*
When you unpack your unit, carefully remove all of the packaging
materials, bags, and packaging labels.
*
Make sure that all of the parts and accessories are present and intact.
*
Before using your unit, clean the fixed vat, the removable vat,
the cover and the blade well with soapy water or water with
dishwashing liquid added.
*
Rinse and dry thoroughly.
See upkeep section.
ASSEMBLY OF THE ICE CREAM MAKER
*
Warning, make sure that the unit is unplugged before any operations.
*
Place the removable vat into the body of the unit and push it in
completely. Position the hooks of the handle facing the slots of
the fixed vat.
*
Put the mixer into the removable aluminum vat.
*
Position the cover and lock it by turning it counter-clockwise.
STARTING
*
Before using the unit, prepare your ice cream mixture (see recipes).
If you use a hot preparation, let it cool down in the refrigerator until
the mixture is at the temperature of the refrigerator (about
10 °C).
*
Put the unit on a flat surface and make sure that the aeration
gratings are not blocked.
*
Plug in the unit. The screen will then display “
00
”.
*
Pour the preparation into the removable vat. IMPORTANT: Never
put hot foods into the vat.
*
IMPORTANT: never fill the vat more than 60 % ( 720 cl)
because the volume increases as the ice cream is made.
*
Position the mixer in the axis of the motor and close the cover by
turning it counter-clockwise.
*
Press the “start/stop” button to turn the unit on. The screen
will display “
60
:
00
”. You can press the on/off button at any time
to stop the unit.
*
To change the pre-selected time, press the “+” and “-” buttons:
•
“+” button: One short press on this button will increase the
time by one minute, one long press will increase the time more
rapidly. The maximum time is
60 minutes.
• “-” button: One short press on this button will decrease the
time by one minute, one long press will decrease the time more
rapidly. The minimum time is
5
minutes.
*
“Start/pause” button: After selecting the time, press this button
to start the mode selected. You can press the start/pause button at
any time to put the unit in pause and thereby put it automatically
in the “keep cold” function.
*
Do not operate your unit without its cover in order to avoid loss
of cold.
56