Labrie ALLEY -GATOR RIGHT-HAND Maintenance Manual Download

Page: 51 / 108

Maintenance

Pendulum pack/return/autopack/

autostop (check stall warning light

function)

Monthly (maintenance)

Hopper cover open/close (optional, if

equipped)

Daily (operator)

Tailgate open/close

Daily (operator)

Body raised up/down

Daily (operator)

IMPORTANT

: Perform safety lockout tests to check limit and proximity switches

Access ladder test (access ladder

proximity switch) [optional, if

equipped]

Daily (operator)

Tailgate test (tailgate limit switch, check

for warning light & buzzer)

Daily (operator)

Lift up lockout/hopper cover test

(hopper cover limit switch - optional, if

equipped)

Daily (operator)

Lift up lockout (lift up function locked

out if body is raised)

Daily (operator)

Other

As specified by FMCSR and/or owner

Table 5

Operation (misc. controls and features) - cont’d

Description

Schedule (Performer)

IMPORTANT

: Check control console warning devices are functioning

Pump button light

Daily (operator)

Hopper cover warning light (optional)

Daily (operator)

Tailgate open warning light/external

alarm (tailgate open limit switch)

Daily (operator)

Lift elevated warning light & optional

buzzer (activates if vehicle exceeds

1000

rpm)

Daily (operator)

Body raised warning light/buzzer

Daily (operator)

Table 4

Operation (main controls) - cont’d

Description

Schedule (Performer)

Summary of Contents for ALLEY -GATOR RIGHT-HAND













































































































Search results

Summary of Contents for ALLEY -GATOR RIGHT-HAND

Reviews:

Related manuals for ALLEY -GATOR RIGHT-HAND

Brands by name

Popular brands

Labrie ALLEY -GATOR RIGHT-HAND, Maintenance Manual

Search results

Summary of Contents for ALLEY -GATOR RIGHT-HAND

Reviews:

Related manuals for ALLEY -GATOR RIGHT-HAND

Brands by name

Popular brands