Labrie ALLEY -GATOR RIGHT-HAND Maintenance Manual Download

Page: 52 / 108

Maintenance

IMPORTANT

: Check external lights and miscellaneous are functioning

Stop, signal and tail lights

Pre-trip (operator), daily (optional)

Marker lights

Pre-trip (operator), daily (optional)

Hopper light

Pre-trip (operator), daily (optional)

Lift light

Pre-trip (operator), daily (optional)

Backup lights

Pre-trip (operator), daily (optional)

Backup flood lights

Pre-trip (operator), daily (optional)

Strobe lights (if equipped)

Pre-trip (operator), daily (optional)

Camera lights (if equipped)

Pre-trip (operator), daily (optional)

Alternating flashers (if equipped)

Pre-trip (operator), daily (optional)

Backup alarm

Pre-trip (operator), daily (optional)

Perimeter/proximity motion sensors (if

equipped)

Pre-trip (operator)

IMPORTANT

: Check miscellaneous control console devices are functioning

Other

As specified by FMCSR and/or owner

Table 6

Hydraulic systems (cont’d)

Description

Schedule (Performer)

Check for leaks, damage, etc. on

hydraulic oil tank

Pre-trip (operator), monthly (maintenance)

Confirm that hydraulic oil tank is

securely mounted to chassis frame

Pre-trip (operator), monthly (maintenance)

Check oil level in hydraulic oil tank (all

cylinders retracted)

Pre-trip (operator), monthly (maintenance)

Check oil condition (not burnt/dirty)

Monthly (maintenance)

Replace oil

As required

Confirm that suction ball valve is fully

open

Pre-trip (operator), monthly (maintenance)

Table 5

Operation (misc. controls and features) - cont’d

Description

Schedule (Performer)

Summary of Contents for ALLEY -GATOR RIGHT-HAND













































































































Search results

Summary of Contents for ALLEY -GATOR RIGHT-HAND

Reviews:

Related manuals for ALLEY -GATOR RIGHT-HAND

Brands by name

Popular brands

Labrie ALLEY -GATOR RIGHT-HAND, Maintenance Manual

Search results

Summary of Contents for ALLEY -GATOR RIGHT-HAND

Reviews:

Related manuals for ALLEY -GATOR RIGHT-HAND

Brands by name

Popular brands