Labrie ALLEY -GATOR RIGHT-HAND, Maintenance Manual

Page: 72 / 108

62 Maintenance
Figure 3-35 Crusher panel up proximity switch
How to Adjust
N
OTE
:
The crusher panel has to be lowered to access this proximity switch.
To adjust the crusher panel up proximity switch:
1.
Fully LOWER the crusher panel.
2.
COMPLETE the Lockout/Tagout Procedure (refer to “Lockout/Tagout Procedure” on
page 20).
3.
ENTER the hopper.
4.
LOOSEN the proximity switch mounting nuts.
5.
SLIDE the switch forward or backward in the mount to achieve a gap of approximately ¼” with
the tab of the crusher panel.
6.
TIGHTEN the proximity switch nuts.
7.
EXIT the hopper.
8.
TEST the operation of the switch and REPEAT the steps as necessary.
Joystick
The joystick is a dual axis, electronic remote control lever that allows the operator to perform two
proportional functions at the same time. Proportional operations control all movements of the arm
and slide. The on-off thumbswitches located on the top of the lever are used to operate the grabber
controls.