Labrie ALLEY -GATOR RIGHT-HAND, Maintenance Manual

Page: 53 / 108

Maintenance 43
Clean the breather cap (replace if
necessary) [more often if required]
Monthly (maintenance)
IMPORTANT : To protect the hydraulic components of your new equipment, the
return line filter and in-line pressure filter must be changed after the first 50 hours of use.
Thereupon, the filters should be changed once every 2500 hours or as per “pop-up”
service indicator or following a major hydraulic component failure.
Change hydraulic return line oil filter As per indicator
In-line pressure filter (1) As per indicator
Clean magnetic plug At each oil change
Inspect pumps for leaks Pre-trip (operator), monthly (maintenance)
Ensure pumps are securely mounted Pre-trip (operator), monthly (maintenance)
Ensure driveline is security mounted Monthly (maintenance)
Inspect valve banks for leaks Pre-trip (operator), monthly (maintenance)
Ensure valve banks are security mounted Pre-trip (operator), monthly (maintenance)
Check system pressure relief valve
settings. Adjust if required
Annually or every 2500 hours (whichever is
more frequent) [use pressure gauge; record]
Inspect all hydraulic lines for leaks,
chafing
Pre-trip (operator), monthly (maintenance)
Inspect all hydraulic cylinders and misc.
hydraulic components for leaks
Pre-trip (operator)
Other As specified by FMCSR and/or owner
Table 7 Chassis pneumatic system
Description Schedule (Performer)
Drain air tanks [at the end of each day] Daily (optional)
Inspect air lines for leaks Daily (operator)
Other As specified by FMCSR and/or owner
Table 6 Hydraulic systems (cont’d)
Description Schedule (Performer)